All NorthStar Trailers 100% Australian made to the highest quality. We offer a 1 Year Warranty.
Trailer weight may vary depending on construction.
The trailer deck can be built to suit your requirements. Commonly between 6-9 MT in length with a width of 2.5 metres. The trailer height with 20” axle is from 1200mm.
The main chassis frame of the Dog Trailer has a depth of 3.75mm (6mm 350GR webb plate with 130 x 16 bottom flange). Cross members are made of 100 x 45 TBF and the combing rail is constructed of 125 x 65 channel.
Tie down points on the trailer are positioned in the floor along each side of the trailer to allow tensioning of loads with chains. Tie down points are engineered to 1500 Kg on the trailer are positioned in the floor along each side of the trailer to allow tensioning of loads with chains.
A rope rail is fitted to the trailer underneath the combing rail.
The ball race is a double row 1000 x 90 unit. Turn table lock is fitted as standard.
The floor is constructed of 5mm checker plate.
A choice of the Bartlett 59 AX, 50mm ring feeder or the DB1385 Pintle hook
20” axles with 10 on 285 PCD are fitted as standard.
17.5” & 19.5” can also be supplied when required.
ABS Braking system fitted.
The trailer shall be to ADR 38-2 standard with 7" linings, full air using an A.B.C. brake system, with 24 / 30 boosters.
Suspension is a FUWA K HITCH over slung style with 9 leaf springs.
Airbag suspension is also an option that can be fitted.
Trailer Tyres and Rims
255R / 70 22.5” are fitted as standard. 235/70 17.5” & 265/70 19.5” are also available. The trailer is fitted with a spare wheel and tyre as standard. The spare wheel carrier is mounted between the chassis rails for easy access for (1) one only person to remove and replace spare wheel. Clamped up by a winch mechanism for simple use.
A quality wind down leg is fitted to the drawbar.
All lights are LED which are mounted as per ADR 62 / 00 requirements with a round 7 pin trailer plug.
The trailer is fitted with an under mounted low profile tool box as standard. Extra toolboxes can be supplied if required.
A 60lt aluminum water tank comes fitted as standard.
Mudguards are mounted at the front and rear of the wheels with steel stays.
Mud flaps are attached to the rear guards.
Our finishing process eliminates all burrs and sharp edges, as well as sandblasting and coating with two pack paint in your fleet colors.
Other Extras AvailableGates, Gate Pockets
