All NorthStar Trailers 100% Australian made to the highest quality. We offer a 1 Year Warranty.
|
Description
|
Capacity
|
| Axle Group | 25-27 tn |
| Gross Capacity | 49.0 tn |
| Approximate Tare Weight from | 11.0 tn |
Trailer weight may vary depending on construction
The deck is 9 metres in length with a width of 2.5 metres. 0.900m beavertail. The trailer height with 20” axle is from 1000mm.
The main chassis frame has a depth of 800mm (310UB). Cross members are made of 200 UB and the combing rail is 10mm profile cut plate.
Tie down points are positioned in the floor along each side of the trailer to allow tensioning of loads with chains. A rope rail is fitted to the trailer underneath of the combing rail.
Construction of rear ramps are 2.500 x 750m wide, 150 x 100 x 9mm RHS, with 8mm Weldox plate and 20 mm grip bars.
The hinge pins are made of 40mm high tensile steel with greaseable bushes to save on excess wear and tear. Hydraulics are fitted as standard, which has a self sufficient power pack located in the well, at the rear of the trailer. The truck (12 or 24 volt) charges the power pack. The rams are heavy duty, 18" x 3 " in size, mounted on the rear of the ramps.
The floor is constructed of 5 mm checker plate.
20” axles with 10 on 285 PCD are fitted as standard.
17.5” & 19.5” can also be supplied when required.
ABS Braking Systems are fitted. The trailer shall be to ADR 38-2 standard with 7" linings, full air using an A.B.C. brake system, with 24 / 30 boosters.
Suspension is a FUWA KHITCH under slung style with 9 leaf springs.
Airbag suspension is also an option that can be fitted.
255R / 70 22.5” are fitted as standard. 235/70 17.5” & 265/70 19.5” are also available. The trailer is fitted with a spare wheel and tyre as standard. The spare wheel carrier is mounted between the chassis rails for easy access for (1) one only person to remove and replace spare wheel. Clamped up by a winch mechanism for simple use.
A quality two Speed Wind down Leg fitted as standard.
LED lights are fitted as stardand and mounted as per ADR 62 / 00 requirements with a round 7 pin trailer plug.
The trailer is fitted with an under mounted low profile tool box as standard as well as one in the beavertail. DECK GOSSENECK
60lt aluminum water tank comes fitted as standard.
Extra toolboxes or custom made toolboxes can be supplied if required.
Mudguards are mounted at the front and rear of the wheels with steel stays.
Mud flaps are attached to the rear guards.
Our finishing process eliminates all burrs and sharp edges, as well as sandblasting and coating with two pack paint in your fleet colours.
Deck widening models
Gates, Gate Pockets
Fuel and or Water Tanks
Flush Combing
Alloy Wheels
Air Bag suspension
Container pins
Camera
Every trailer comes with 12 months Full Warranty.
North Star Transport Equipment is a company prepared to go the extra mile and has a high reputation of service and quality.
*Please note: Ratings are Federal Ratings, but may differ from state to state. Capacities quoted are to the best of our knowledge and we accept no responsibility for these quoted weights, but if difficulties arise, please notify us with your problems.
